Polycap HD (Heavy Duty) is a well-engineered product that offers high filtration efficiency and excellent filtrate purity due to its materials and methods of manufacture. Polycap HD provides a unique advantage in process applications as its performance characteristics fit between gross filters and microporous membrane filters used for final filtration.
Features and Benefits
• 100% polypropylene filter media, support system and housing allows usage with broad range of
solutions, pH and temperature
• High flow and high retention capacity
• Materials of construction are FDA approved for food contact
• Able to be sterilized by autoclaving with steam at 121° C for 20 minutes
• Manual vent with luer lock to bleed air from upstream or serve as an injection or sample port
• Available in 0.2, 0.45, 1.0, 5.0 and 10 µm pore sizes and a variety of end-fitting configurations
• Manufactured in a Class 10,000 clean room in an ISO certified manufacturing plant
Applications
| • Clean air and gas equipment |
• Prefiltration for RO/UF/MF membranes |
| • Cosmetics and personal care products |
• Sample preparations |
| • Food and beverage |
• Semiconductor and magnetic media |
| • General fine filtration |
• Pharmaceutical solutions |
| • Inks and pigments |
• Solvents |
| • Photographic emulsions and make-up water |
• Buffers |
| • Reagents |
|
Technical Properties
| Housing: |
Polypropylene |
| Vent: |
On inlet |
| Filter Media: |
Polypropylene |
| Support System: |
Polypropylene |
| Biosafety: |
Materials pass USP Class VI |
| Filtration Area: |
36 mm capsule: 400 cm2 (62 in2) |
| |
75 mm capsule: 820 cm2 (127 in2) |
| |
150 mm capsule: 1,650 cm2 (256 in2) |
| Sterilization: |
capsules autoclavable at 121° C for 20 minutes (maximum temperature is 132° C) |
| Non-Pyrogenic: |
LAL tested, non-reactive: |
| Maximum Pressure: |
4.1 bar (60 psi) |