Polycap™ AS Capsule Filters

CategoriesShow all

Ask Qorpak

Submit
Polycap™ AS Capsule Filters

Polycap™ AS Capsule Filters

Polycap AS is a unique product recommended for filtering aqueous solutions. It combines a glass microfiber (GMF) prefilter and a nylon membrane, prolonging the life of the filter and allowing larger volumes and difficult samples to be filtered easily.

Features and Benefits
• First layer (GMF) acts as a prefilter to ensure longer membrane (0.2, 0.45 and 1.0 µm) life and higher
filtration efficiency
• Nylon membrane layer is inherently hydrophilic, has low extractables, is bio-safe and has excellent flow rates
• Ultra-clean containing no surfactant or mold release agents
• Housing thermally fused (no glues, adhesives or extraneous materials)
• Integrity-testable by bubble point, pressure decay or forward flow methods
• Provides highly effective filtration area in a small size
• Autoclavable; some pre-sterilized with gamma irradiation
• Manufactured in clean room facilities under ISO Quality Systems

Applications

• Admixtures • Nutrients
• Biologicals • Ophthalmic solutions
• Buffers • Pharmaceutical solutions
• Cleaning/rinsing solutions • Reagent preparation
• Enzymes • Salt solutions
• Extemporaneous solutions • Therapy solutions
• Immunologicals • Tissue culture media
• Irrigation solutions • Viral suspensions

Technical Properties

Housing: Polypropylene
Vent: On inlet
Prefilter: Glass microfiber double laminated with polyolefin monofilament non-woven
Membrane: Nylon
Support System: Polypropylene
Sealing: Heat-fused
Maximum Pressure: 60 psi (4.1 bar)
Non-Pyrogenic: LAL tested, non-reactive
Biosafety: Materials pass USP Class VI
Sterilization: Capsules are autoclavable at 121° C for 20 minutes (maximum temperature is 132° C). However, an integrity test should be performed after autoclaving.
Filtration Area: 36 mm capsule: 400 cm2 (62 in2)
75 mm capsule: 820 cm2 (127 in2)
150 mm capsule: 1,650 cm2 (256 in2)
Water Bubble Point (Typical): 0.2 µm membrane: 2.9 bar (42 psi)
0.45 µm membrane: 2.1 bar (30 psi)
1.0 µm membrane: 0.5 bar (8 psi)

Sort By:
Sort By:
Click on Item# to view possible quantity discounts that may be available.
  • Diameter
  • Capacity / Volume
  • Size
  • Item #
  • Case pack
  • Price
  • Qty
  •  
  • 36mm
  • 0.2µm
  • Inlet: SB, Outlet: SB
  • AKM-9007-0601
  • each
  • $56.40
  • Add to Cart
  • 36mm
  • 0.45µm
  • Inlet: SB, Outlet: SB
  • AKM-9007-0604
  • each
  • $56.40
  • Add to Cart
  • 36mm
  • 0.2µm
  • Inlet: 1/2" SB, Outlet: 1/2" SB
  • AKM-9007-0599
  • each
  • $56.40
  • Add to Cart
  • 36mm
  • 0.2µm
  • Inlet: MNPT, Outlet: SB
  • AKM-9007-0600
  • each
  • $56.40
  • Add to Cart
  • 36mm
  • 0.2µm
  • Inlet: 3/8" FNPT, Outlet: 3/8" FNPT
  • AKM-9007-0596
  • 5
  • $365.00
  • Add to Cart
  • 36mm
  • 0.2µm
  • Inlet: SB, Outlet: SB with Filling Bell
  • AKM-9007-0602
  • each
  • $61.82
  • Add to Cart
  • 75mm
  • 0.2µm
  • Inlet: 3/8" FNPT, Outlet: 3/8" FNPT
  • AKM-9007-0606
  • 5
  • $411.24
  • Add to Cart
  • 75mm
  • 0.45µm
  • Inlet: SB, Outlet: SB
  • AKM-9007-0607
  • 5
  • $395.49
  • Add to Cart